A metadirectory system provides for the flow of data between one or more directory services and databases in order to maintain synchronization of that data. It is an important part of identity management systems. The data being synchronized typically are collections of entries that contain user profiles and possibly authentication or policy information. Most metadirectory deployments synchronize data into at least one LDAP-based directory server, to ensure that LDAP-based applications such as single sign-on and portal servers have access to recent data, even if the data is mastered in a non-LDAP data source. Metadirectory products support filtering and transformation of data in transit. Most identity management suites from commercial vendors include a metadirectory product, or a user provisioning product.
Lenny (chatbot)
Lenny is a chatbot designed to scam bait telemarketers, scammers, and other unwanted incoming calls using messages. == Background == Telemarketers may be perceived by some as annoying and wasting people's time, and some deliberately attempt to scam or defraud people. In April 2018, stats published by YouMail estimated the United States received over three billion robocalls that month. Attempts to block the callers have been hindered by Caller ID spoofing. == Features == The bot was written in 2011, and development taken over by an Alberta-based programmer known as "Mango" two years later. It is driven by sixteen pre-recorded audio clips, spoken in a soft and slow Australian accent in the manner of an elderly man. The bot's original creator stated on Reddit that in building the character he asked himself the question "What would be a telemarketer's worst nightmare?" He answered with this being a lonely old man who is up for a chat, proud of his family and can't focus on the telemarketer's goal. There is no speech recognition or artificial intelligence, and the bot's software is simple and straightforward. The first four clips are played sequentially in order to grab the telemarketer's interest and begin their sales pitch to Lenny, then the remaining twelve are played sequentially on loop until the telemarketer hangs up. The program waits for a gap of 1.5 seconds of silence before playing the next audio clip, to simulate natural breaks in the conversation. The messages are purposefully vague and open-ended so they can be applied to as many conversations as possible. They include references to Lenny's children, the state of the economy, and being interrupted by some ducks outside. According to research into the bot, around 75% of callers realise they are talking to a computer program within two minutes; however, some calls have lasted around an hour. == Distribution == Though other chatbots had been developed earlier, Lenny was the first one to be released for free on a public server and could be accessed by anyone. Recordings of conversations with the bot are widely shared online on websites such as Reddit and YouTube. Though "Mango" only intended Lenny to be used against dishonest telemarketers, such as scammers, he does not mind it being used against callers who are merely annoying. The bot has also been used against political campaigners, such as a supporter of Pierre Poilievre in the 2015 Canadian federal election.
Cross-entropy
In information theory, the cross-entropy between two probability distributions p {\displaystyle p} and q {\displaystyle q} , over the same underlying set of events, measures the average number of bits needed to identify an event drawn from the set when the coding scheme used for the set is optimized for an estimated probability distribution q {\displaystyle q} , rather than the true distribution p {\displaystyle p} . == Definition == The cross-entropy of the distribution q {\displaystyle q} relative to a distribution p {\displaystyle p} over a given set is defined as follows: H ( p , q ) = − E p [ log q ] , {\displaystyle H(p,q)=-\operatorname {E} _{p}[\log q],} where E p [ ⋅ ] {\displaystyle \operatorname {E} _{p}[\cdot ]} is the expected value operator with respect to the distribution p {\displaystyle p} . The definition may be formulated using the Kullback–Leibler divergence D K L ( p ∥ q ) {\displaystyle D_{\mathrm {KL} }(p\parallel q)} , divergence of p {\displaystyle p} from q {\displaystyle q} (also known as the relative entropy of p {\displaystyle p} with respect to q {\displaystyle q} ). H ( p , q ) = H ( p ) + D K L ( p ∥ q ) , {\displaystyle H(p,q)=H(p)+D_{\mathrm {KL} }(p\parallel q),} where H ( p ) {\displaystyle H(p)} is the entropy of p {\displaystyle p} . For discrete probability distributions p {\displaystyle p} and q {\displaystyle q} with the same support X {\displaystyle {\mathcal {X}}} , this means The situation for continuous distributions is analogous. We have to assume that p {\displaystyle p} and q {\displaystyle q} are absolutely continuous with respect to some reference measure r {\displaystyle r} (usually r {\displaystyle r} is a Lebesgue measure on a Borel σ-algebra). Let P {\displaystyle P} and Q {\displaystyle Q} be probability density functions of p {\displaystyle p} and q {\displaystyle q} with respect to r {\displaystyle r} . Then − ∫ X P ( x ) log Q ( x ) d x = E p [ − log Q ] , {\displaystyle -\int _{\mathcal {X}}P(x)\,\log Q(x)\,\mathrm {d} x=\operatorname {E} _{p}[-\log Q],} and therefore NB: The notation H ( p , q ) {\displaystyle H(p,q)} is also used for a different concept, the joint entropy of p {\displaystyle p} and q {\displaystyle q} . == Motivation == In information theory, the Kraft–McMillan theorem establishes that any directly decodable coding scheme for coding a message to identify one value x i {\displaystyle x_{i}} out of a set of possibilities { x 1 , … , x n } {\displaystyle \{x_{1},\ldots ,x_{n}\}} can be seen as representing an implicit probability distribution q ( x i ) = ( 1 2 ) ℓ i {\displaystyle q(x_{i})=\left({\frac {1}{2}}\right)^{\ell _{i}}} over { x 1 , … , x n } {\displaystyle \{x_{1},\ldots ,x_{n}\}} , where ℓ i {\displaystyle \ell _{i}} is the length of the code for x i {\displaystyle x_{i}} in bits. Therefore, cross-entropy can be interpreted as the expected message-length per datum when a wrong distribution q {\displaystyle q} is assumed while the data actually follows a distribution p {\displaystyle p} . That is why the expectation is taken over the true probability distribution p {\displaystyle p} and not q . {\displaystyle q.} Indeed the expected message-length under the true distribution p {\displaystyle p} is E p [ ℓ ] = − E p [ ln q ( x ) ln ( 2 ) ] = − E p [ log 2 q ( x ) ] = − ∑ x i p ( x i ) log 2 q ( x i ) = − ∑ x p ( x ) log 2 q ( x ) = H ( p , q ) . {\displaystyle {\begin{aligned}\operatorname {E} _{p}[\ell ]&=-\operatorname {E} _{p}\left[{\frac {\ln {q(x)}}{\ln(2)}}\right]\\[1ex]&=-\operatorname {E} _{p}\left[\log _{2}{q(x)}\right]\\[1ex]&=-\sum _{x_{i}}p(x_{i})\,\log _{2}q(x_{i})\\[1ex]&=-\sum _{x}p(x)\,\log _{2}q(x)=H(p,q).\end{aligned}}} == Estimation == There are many situations where cross-entropy needs to be measured but the distribution of p {\displaystyle p} is unknown. An example is language modeling, where a model is created based on a training set T {\displaystyle T} , and then its cross-entropy is measured on a test set to assess how accurate the model is in predicting the test data. In this example, p {\displaystyle p} is the true distribution of words in any corpus, and q {\displaystyle q} is the distribution of words as predicted by the model. Since the true distribution is unknown, cross-entropy cannot be directly calculated. In these cases, an estimate of cross-entropy is calculated using the following formula: H ( T , q ) = − ∑ i = 1 N 1 N log 2 q ( x i ) {\displaystyle H(T,q)=-\sum _{i=1}^{N}{\frac {1}{N}}\log _{2}q(x_{i})} where N {\displaystyle N} is the size of the test set, and q ( x ) {\displaystyle q(x)} is the probability of event x {\displaystyle x} estimated from the training set. In other words, q ( x i ) {\displaystyle q(x_{i})} is the probability estimate of the model that the i-th word of the text is x i {\displaystyle x_{i}} . The sum is averaged over the N {\displaystyle N} words of the test. This is a Monte Carlo estimate of the true cross-entropy, where the test set is treated as samples from p ( x ) {\displaystyle p(x)} . == Relation to maximum likelihood == The cross entropy arises in classification problems when introducing a logarithm in the guise of the log-likelihood function. This section concerns the estimation of the probabilities of different discrete outcomes. To this end, denote a parametrized family of distributions by q θ {\displaystyle q_{\theta }} , with θ {\displaystyle \theta } subject to the optimization effort. Consider a given finite sequence of N {\displaystyle N} values x i {\displaystyle x_{i}} from a training set, obtained from conditionally independent sampling. The likelihood assigned to any considered parameter θ {\displaystyle \theta } of the model is then given by the product over all probabilities q θ ( X = x i ) {\displaystyle q_{\theta }(X=x_{i})} . Repeated occurrences are possible, leading to equal factors in the product. If the count of occurrences of the value equal to x {\displaystyle x} is denoted by # x {\displaystyle \#x} , then the frequency of that value equals # x / N {\displaystyle \#x/N} . If p ( X = x ) {\displaystyle p(X=x)} is the underlying probability distribution, for large N {\displaystyle N} we expect p ( X = x ) ≈ # x / N {\displaystyle p(X=x)\approx \#x/N} , by the law of large numbers. Writing our likelihood function as the product of observations from the distribution q θ {\displaystyle q_{\theta }} : L ( θ ; x ) = ∏ i q θ ( X = x i ) = ∏ x q θ ( X = x ) # x ≈ ∏ x q θ ( X = x ) N ⋅ p ( X = x ) = exp log [ ∏ x q θ ( X = x ) N ⋅ p ( X = x ) ] = exp ( ∑ x N ⋅ p ( X = x ) log q θ ( X = x ) ) , {\displaystyle {\begin{aligned}{\mathcal {L}}(\theta ;{\mathbf {x} })&=\prod _{i}q_{\theta }(X=x_{i})=\prod _{x}q_{\theta }(X=x)^{\#x}\\&\approx \prod _{x}q_{\theta }(X=x)^{N\cdot p(X=x)}=\exp \log \left[\prod _{x}q_{\theta }(X=x)^{N\cdot p(X=x)}\right]\\&=\exp \left(\sum _{x}N\cdot p(X=x)\log q_{\theta }(X=x)^{}\right),\end{aligned}}} where we have used the calculation rules for the logarithm in the final line. Notice how the exponent contains a − H ( p , q θ ) {\displaystyle -H(p,q_{\theta })} term. Taking the logarithm of both sides gives: log L ( θ ; x ) = − N ⋅ H ( p , q θ ) . {\displaystyle \log {\mathcal {L}}(\theta ;{\mathbf {x} })=-N\cdot H(p,q_{\theta }).} Since the logarithm is a monotonically increasing function, the maximizing value of θ {\displaystyle \theta } is unaffected by this final step. Similarly, the maximizing value of θ {\displaystyle \theta } is unaffected by the factor of N {\displaystyle N} . So we observe that the likelihood maximization amounts to minimization of the cross-entropy. == Cross-entropy minimization == Cross-entropy minimization is frequently used in optimization and rare-event probability estimation. When comparing a distribution q {\displaystyle q} against a fixed reference distribution p {\displaystyle p} , cross-entropy and KL divergence are identical up to an additive constant (since p {\displaystyle p} is fixed): According to the Gibbs' inequality, both take on their minimal values when p = q {\displaystyle p=q} , which is 0 {\displaystyle 0} for KL divergence, and H ( p ) {\displaystyle \mathrm {H} (p)} for cross-entropy. In the engineering literature, the principle of minimizing KL divergence (Kullback's "Principle of Minimum Discrimination Information") is often called the Principle of Minimum Cross-Entropy (MCE), or Minxent. However, as discussed in the article Kullback–Leibler divergence, sometimes the distribution q {\displaystyle q} is the fixed prior reference distribution, and the distribution p {\displaystyle p} is optimized to be as close to q {\displaystyle q} as possible, subject to some constraint. In this case the two minimizations are not equivalent. This has led to some ambiguity in the literature, with some authors attempting to resolve the inconsistency by restating cross-entropy to be D K L ( p ∥ q ) {\displaystyle D_{\mathrm {KL} }(p\parallel q)} , rather than H (
Pruning (artificial neural network)
In deep learning, pruning is the practice of removing parameters from an existing artificial neural network. The goal of this process is to reduce the size (parameter count) of the neural network (and therefore the computational resources required to run it) whilst maintaining accuracy. This can be compared to the biological process of synaptic pruning which takes place in mammalian brains during development. == Node (neuron) pruning == A basic algorithm for pruning is as follows: Evaluate the importance of each neuron. Rank the neurons according to their importance (assuming there is a clearly defined measure for "importance"). Remove the least important neuron. Check a termination condition (to be determined by the user) to see whether to continue pruning. == Edge (weight) pruning == Most work on neural network pruning does not remove full neurons or layers (structured pruning). Instead, it focuses on removing the most insignificant weights (unstructured pruning), namely, setting their values to zero. This can either be done globally by comparing weights from all layers in the network or locally by comparing weights in each layer separately. Different metrics can be used to measure the importance of each weight. Weight magnitude as well as combinations of weight and gradient information are commonly used metrics. Early work suggested also to change the values of non-pruned weights. == When to prune the neural network? == Pruning can be applied at three different stages: before training, during training, or after training. When pruning is performed during or after training, additional fine-tuning epochs are typically required. Each approach involves different trade-offs between accuracy and computational cost.
Win–stay, lose–switch
In psychology, game theory, statistics, and machine learning, win–stay, lose–switch (also win–stay, lose–shift or Pavlov, named after Ivan Pavlov) is a heuristic learning strategy used to model learning in decision situations. It was first invented as an improvement over randomization in bandit problems. It was later applied to the prisoner's dilemma in order to model the evolution of altruism. In most versions, it starts either with a cooperate, then proceeds as always, or starts with a "probe" of cooperate-defect-cooperate to determine the other player's strategy. A mutual cooperation is regarded as a win. The learning rule bases its decision only on the outcome of the previous play. Outcomes are divided into successes (wins) and failures (losses). If the play on the previous round resulted in a success, then the agent plays the same strategy on the next round. Alternatively, if the play resulted in a failure the agent switches to another action. A large-scale empirical study of players of the game rock, paper, scissors shows that a variation of this strategy is adopted by real-world players of the game, instead of the Nash equilibrium strategy of choosing entirely at random between the three options.
Geo-replication
Geo-replication systems are designed to provide improved availability and disaster tolerance by using geographically distributed data centers. This is intended to improve the response time for applications such as web portals. Geo-replication can be achieved using software, hardware or a combination of the two. == Software == Geo-replication software is a network performance-enhancing technology that is designed to provide improved access to portal or intranet content for users at the most remote parts of large organizations. It is based on the principle of storing complete replicas of portal content on local servers, and then keeping the content on those servers up-to-date using heavily compressed data updates. === Portal acceleration === Geo-replication technologies are used to provide replication of the content of portals, intranets, web applications, content and data between servers, across wide area networks WAN to allow users at remote sites to access central content at LAN speeds. Geo-replication software can improve the performance of data networks that suffer limited bandwidth, latency and periodic disconnection. Terabytes of data can be replicated over a wide area network, giving remote sites faster access to web applications. Geo-replication software uses a combination of data compression and content caching technologies. differencing technologies can also be employed to reduce the volume of data that has to be transmitted to keep portal content accurate across all servers. This update compression can reduce the load that portal traffic places on networks, and improve the response time of a portal. === Portal replication === Remote users of web portals and collaboration environments will frequently experience network bandwidth and latency problems which will slow down their experience of opening and closing files, and otherwise interacting with the portal. Geo-replication technology is deployed to accelerate the remote end user portal performance to be equivalent to that experienced by users locally accessing the portal in the central office. === Differencing engine technologies === To deliver this reduction in the size of the required data updates across a portal, geo-replication systems often use differencing engine technologies. These systems are able to difference the content of each portal server right down to the byte level. This knowledge of the content that is already on each server enables the system to rebuild any changes to the content on one server, across each of the other servers in the deployment from content already hosted on those other servers. This type of differencing system ensures that no content, at the byte level, is ever sent to a server twice. === Offline portal replication on laptops === Geo-replication systems are often extended to deliver local replication beyond the server and down to the laptop used by a single user. Server to laptop replication enables mobile users to have access to a local replica of their business portal on a standard laptop. This technology may be employed to provide in the field access to portal content by, for example, sales forces and combat forces. == Geo-replication systems ==
Multispectral pattern recognition
Multispectral remote sensing is the collection and analysis of reflected, emitted, or back-scattered energy from an object or an area of interest in multiple bands of regions of the electromagnetic spectrum (Jensen, 2005). Subcategories of multispectral remote sensing include hyperspectral, in which hundreds of bands are collected and analyzed, and ultraspectral remote sensing where many hundreds of bands are used (Logicon, 1997). The main purpose of multispectral imaging is the potential to classify the image using multispectral classification. This is a much faster method of image analysis than is possible by human interpretation. == Multispectral remote sensing systems == Remote sensing systems gather data via instruments typically carried on satellites in orbit around the Earth. The remote sensing scanner detects the energy that radiates from the object or area of interest. This energy is recorded as an analog electrical signal and converted into a digital value though an A-to-D conversion. There are several multispectral remote sensing systems that can be categorized in the following way: === Multispectral imaging using discrete detectors and scanning mirrors === Landsat Multispectral Scanner (MSS) Landsat Thematic Mapper (TM) NOAA Geostationary Operational Environmental Satellite (GOES) NOAA Advanced Very High Resolution Radiometer (AVHRR) NASA and ORBIMAGE, Inc., Sea-viewing Wide field-of-view Sensor (SeaWiFS) Daedalus, Inc., Aircraft Multispectral Scanner (AMS) NASA Airborne Terrestrial Applications Sensor (ATLAS) === Multispectral imaging using linear arrays === SPOT 1, 2, and 3 High Resolution Visible (HRV) sensors and Spot 4 and 5 High Resolution Visible Infrared (HRVIR) and vegetation sensor Indian Remote Sensing System (IRS) Linear Imaging Self-scanning Sensor (LISS) Space Imaging, Inc. (IKONOS) Digital Globe, Inc. (QuickBird) ORBIMAGE, Inc. (OrbView-3) ImageSat International, Inc. (EROS A1) NASA Terra Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) NASA Terra Multiangle Imaging Spectroradiometer (MISR) === Imaging spectrometry using linear and area arrays === NASA Jet Propulsion Laboratory Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) Compact Airborne Spectrographic Imager 3 (CASI 3) NASA Terra Moderate Resolution Imaging Spectrometer (MODIS) NASA Earth Observer (EO-1) Advanced Land Imager (ALI), Hyperion, and LEISA Atmospheric Corrector (LAC) === Satellite analog and digital photographic systems === Russian SPIN-2 TK-350, and KVR-1000 NASA Space Shuttle and International Space Station Imagery == Multispectral classification methods == A variety of methods can be used for the multispectral classification of images: Algorithms based on parametric and nonparametric statistics that use ratio-and interval-scaled data and nonmetric methods that can also incorporate nominal scale data (Duda et al., 2001), Supervised or unsupervised classification logic, Hard or soft (fuzzy) set classification logic to create hard or fuzzy thematic output products, Per-pixel or object-oriented classification logic, and Hybrid approaches == Supervised classification == In this classification method, the identity and location of some of the land-cover types are obtained beforehand from a combination of fieldwork, interpretation of aerial photography, map analysis, and personal experience. The analyst would locate sites that have similar characteristics to the known land-cover types. These areas are known as training sites because the known characteristics of these sites are used to train the classification algorithm for eventual land-cover mapping of the remainder of the image. Multivariate statistical parameters (means, standard deviations, covariance matrices, correlation matrices, etc.) are calculated for each training site. All pixels inside and outside of the training sites are evaluated and allocated to the class with the more similar characteristics. === Classification scheme === The first step in the supervised classification method is to identify the land-cover and land-use classes to be used. Land-cover refers to the type of material present on the site (e.g. water, crops, forest, wet land, asphalt, and concrete). Land-use refers to the modifications made by people to the land cover (e.g. agriculture, commerce, settlement). All classes should be selected and defined carefully to properly classify remotely sensed data into the correct land-use and/or land-cover information. To achieve this purpose, it is necessary to use a classification system that contains taxonomically correct definitions of classes. If a hard classification is desired, the following classes should be used: Mutually exclusive: there is not any taxonomic overlap of any classes (i.e., rain forest and evergreen forest are distinct classes). Exhaustive: all land-covers in the area have been included. Hierarchical: sub-level classes (e.g., single-family residential, multiple-family residential) are created, allowing that these classes can be included in a higher category (e.g., residential). Some examples of hard classification schemes are: American Planning Association Land-Based Classification System United States Geological Survey Land-use/Land-cover Classification System for Use with Remote Sensor Data U.S. Department of the Interior Fish and Wildlife Service U.S. National Vegetation and Classification System International Geosphere-Biosphere Program IGBP Land Cover Classification System === Training sites === Once the classification scheme is adopted, the image analyst may select training sites in the image that are representative of the land-cover or land-use of interest. If the environment where the data was collected is relatively homogeneous, the training data can be used. If different conditions are found in the site, it would not be possible to extend the remote sensing training data to the site. To solve this problem, a geographical stratification should be done during the preliminary stages of the project. All differences should be recorded (e.g. soil type, water turbidity, crop species, etc.). These differences should be recorded on the imagery and the selection training sites made based on the geographical stratification of this data. The final classification map would be a composite of the individual stratum classifications. After the data are organized in different training sites, a measurement vector is created. This vector would contain the brightness values for each pixel in each band in each training class. The mean, standard deviation, variance-covariance matrix, and correlation matrix are calculated from the measurement vectors. Once the statistics from each training site are determined, the most effective bands for each class should be selected. The objective of this discrimination is to eliminate the bands that can provide redundant information. Graphical and statistical methods can be used to achieve this objective. Some of the graphic methods are: Bar graph spectral plots Cospectral mean vector plots Feature space plots Cospectral parallelepiped or ellipse plots === Classification algorithm === The last step in supervised classification is selecting an appropriate algorithm. The choice of a specific algorithm depends on the input data and the desired output. Parametric algorithms are based on the fact that the data is normally distributed. If the data is not normally distributed, nonparametric algorithms should be used. The more common nonparametric algorithms are: One-dimensional density slicing Parallelipiped Minimum distance Nearest-neighbor Expert system analysis Convolutional neural network == Unsupervised classification == Unsupervised classification (also known as clustering) is a method of partitioning remote sensor image data in multispectral feature space and extracting land-cover information. Unsupervised classification require less input information from the analyst compared to supervised classification because clustering does not require training data. This process consists in a series of numerical operations to search for the spectral properties of pixels. From this process, a map with m spectral classes is obtained. Using the map, the analyst tries to assign or transform the spectral classes into thematic information of interest (i.e. forest, agriculture, urban). This process may not be easy because some spectral clusters represent mixed classes of surface materials and may not be useful. The analyst has to understand the spectral characteristics of the terrain to be able to label clusters as a specific information class. There are hundreds of clustering algorithms. Two of the most conceptually simple algorithms are the chain method and the ISODATA method. === Chain method === The algorithm used in this method operates in a two-pass mode (it passes through the multispectral dataset two times. In the first pass, the program reads through the dataset and sequentially builds clusters (groups of p